Four Steps of Dustbin Mold Maintenance GENEALOGY NETWORK HUB

Page Information

  • Posted By: xiu umin
  • Posted On: Aug 06, 2019
  • Views: 50
  • Likes: 1
  • Category: Places
  • Description: 1. Enterprises should first understand the basic situation of the Dustbin Mould(FURNITUREMOULD) https://www.furnituremould.com/ , detail the statistics, use, care (lubrication, cleaning, rust prevention) and damage, and then find out which parts and components have been damaged and the degree of wear and tear is provided. Information materials for finding and solving problems, as well as moulding process parameters of the dustbin mould and materials used in the product, in order to shorten the test time of the dustbin mould and improve production efficiency. 2. The processing enterprise should test the various properties of the dustbin mould under the normal operation of the injection moulding machine and the mould, and measure the size of the final moulded plastic part. Through this information, the existing state of the dustbin mould can be determined, and the type can be found. Damage to the cavity, core, cooling system, and parting surface, etc., according to the information provided by the plastic parts, the damage state of the dustbin mould and maintenance measures can be judged. 3. It is necessary to carry out key tracking and inspection on several important parts of the dustbin mould: the function of the ejection and guiding parts is to ensure the opening and closing movement of the mould and the ejection of the plastic parts. If any part is stuck due to damage, the production will be stopped. Therefore, the thimble and guidepost of the mould should be kept lubricated regularly, and the thimble and guide post should be regularly inspected for deformation and surface damage. Once found, it should be replaced in time. After completing a production cycle, the working surface and movement of the dustbin mould should be The guide parts are coated with professional anti-rust oil, especially the protection of the elastic strength of the bearing parts with gears, racks and springs, to ensure that they are always in the best working condition; as the production time continues, the cooling channels It is easy to deposit scale, rust, silt and algae, which makes the cooling passage section smaller, the cooling passage narrows, greatly reduces the heat exchange rate between the coolant and the mould, and increases the production cost of the enterprise. Therefore, the cleaning of the flow channel should be paid attention to. For hot runner moulds, the maintenance of the heating and control system is beneficial to prevent production failures, so it is especially important. 4. There is also the surface maintenance of the dustbin mould. The so-called surface is to prevent corrosion. Therefore, it is especially important to choose a suitable, high-quality and professional anti-rust oil. After the dustbin mould has completed the production task, the residual injection moulding should be carefully removed according to different injection moulding methods. The residual injection moulding and other deposits in the mould can be removed by using copper rods, copper wires and professional mould cleaning agents, and then air-dried. Disable the cleaning of hard objects such as wire and steel bars to avoid scratching the surface. If there is rust caused by corrosive injection moulding, use a grinder to grind and polish, and spray professional anti-rust oil, then store the dustbin mould in a dry, cool, dust-free place. Click Crate Mould https://www.furnituremould.com/ to learn about more information.